Trimec Standard Electromagnet Trimec Standard Electromagnet Trimec Standard Electromagnet The Standard Electromagnetic Locks operate with holding forces up to 580kg.Covering a range of applications the Standard Electromagnet is ideal for applications from office doors through to high use commercial swing doors.With fixing options including wood, aluminium and steel constructions, as well as glass door applications, the range caters to most electromagnetic needs. Features Fail-safe: Unlocks when power is removed Easy installation: Suitable for both new and retrofit usage High holding force: Refer to the technical data overleaf Self-alignment: Armature plate pivots to accommodate door drop Silent operation: No humming or buzzing Dual voltage: Site selectable 12 or 24 VDC Monitoring: Hall Effect Sensors Instantaneous release: Smart electronics on the Z Series Electromagnets eliminate residual magnetism Specification Holding Force: 550kg - 580kg Dimensions: (L)266 x (H)72 x (D)40mm Voltage: 12VDC/24VDC ±10% Current: 512mA @ (12VDC) 256mA @ (24VDC) Monitoring: Hall-Effect & Reed Switch Close Ordering Standard Z8 Electromagnet Description Part Number Monitored with LED Indication LT770600-010 Monitored (Hall Effect & Reed Switch) LT770600-012 Close Trimec Z Series Recessed Electromagnetic LocksHolding forces up to 280kg A4 and A8 Single Series MonitoredElectromagnetic Locks, operate with holding forces from 2… Lockwood Padde Series Wall and Floor Mounted Hold-Open Magnets