Lockwood 216/217 Series 10mm Radius Corner Push and Pull Plates Lockwood 216/217 Series 10mm Radius Corner Push and Pull Plates Lockwood 216/217 Series 10mm Radius Corner Push and Pull Plates The 216 Series Door Furniture is 300 x 65 x 2mm thick stainless steel or brass plate with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door. ApplicationDesigned for use with 3570 Series Mortice Locks and on Push and Pull doors. Specification MaterialsStainless steel or brass. Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Finishes Standard Satin Stainless Steel SS Non Standard Polished Stainless Steel PS Powdercoat PC Polished Brass PB Dimensions300 x 65 x 2mm. Close Downloads Lockwood Push and Pull Door Furniture Catalogue.pdf (.pdf, 2.6 MB) Close Ordering 300mm x 65mm x 2mm with 10mm Radius Corners Description Part Number Plain Plate (Visible Fix) L21707NN Plain Plate (Concealed Fix) L21607NN Plain Plate With D Handle (Concealed Fix) Description Part Number 152 X 17.5mm L21624NN/P2 203 X 17.5mm L21624NN/P3 250 X 17.5mm L21624NN/P4 Plain Plate With D Handle (Visible Fix) Description Part Number 152 X 17.5mm L21724NN/P2 203 X 17.5mm L21724NN/P3 250 X 17.5mm L21724NN/P4 Close Lockwood 214/215 Series 10mm Radius Corner Push and Pull Plates Lockwood 208/209 Series Push and Pull Plates Lockwood Stainless Steel Flush PullsInternal edges are finished for comfort of use.