Lockwood 208/209 Series Push and Pull Plates Lockwood 208/209 Series Push and Pull Plates Lockwood 208/209 Series Push and Pull Plates The 208/209 Series Door Furniture are 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door. ApplicationDesigned for use with 3570 Series Mortice Locks. Specification MaterialsStainless steel. Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Finishes Standard Satin Stainless Steel SS Non Standard Powdercoat PC Polished Stainless Steel PS Dimensions324 x 162 x 2mm. Close Downloads Lockwood Push and Pull Door Furniture Catalogue.pdf (.pdf, 2.6 MB) Close Ordering Square Corner Plate Size 324mm x 162mm x 2mm Description Part Number External Plain Push Plate 20807NNSS Internal Plain Push Plate 20907NNSS External Push Plate With Cyl Hole 20800NALSS 20800NARSS Internal Push Plate With Cyl Hole 20900NALSS 20900NARSS External Plain Plate With Pull Handle 267 X 17.5mm 20824NN/P4SS Internal Plain Plate With Pull Handle 267 X 17.5mm 20924NN/P4SS External Plate With Oval Cyl Hole & Pull Handle 267 X 17.5mm 20825NA/P4LSS 20825NA/P4RSS Internal Plate With Oval Cyl Hole & Pull Handle 267 X 17.5mm 20925NA/P4LSS 20925NA/P4RSS Close Lockwood 184 Offset Pull Handle Lockwood 218/219 Series 10mm Radius Corner Push and Pull Plates Lockwood Stainless Steel Flush PullsInternal edges are finished for comfort of use.