Lockwood 8002 Series Swing Door Operator Lockwood 8002 Series Swing Door Operator Lockwood 8002 Series Swing Door Operator The Lockwood Swing Door Operator is an electro-hydraulic operator designed for a wide variety of applications. It is suitable for almost all types of external and internal swing doors and has been developed to cope with tough conditions.The operator can be mounted on either side of the door for pull or push action and is suitable for single or double doors fitted with butt hinges or pivots. With remote, push button and motion sensor options, the 8002 provides a full range of electronic door opening solutions. Features Opens with motor and closes with spring Opening and closing speeds can be varied individually Door opening angle adjustable up to 120° A range of manual and automatic activation units available Impulse and presence detection sensors available Non Handed Push or pull opening solutions Applications Disability Entrance solutions Hospital and Health Centre Applications Access Controlled Locking In Swinging or Out Swinging Doors Meets requirements for door weights/widths stated in the: Controlled door closing, EN 1154 size 3 - 6 Coordination unit for rebated doors, EN 1158 Door closer with opening device (Swing door operator), DIN 18263-4 AU Size 3-6 ANSI/BHMA A156.10, A156.19 UL325/CUL325 SITAC 0710/97 Specification Electrical230V AC Mains power, 50 Hzfuse10 A Door leaf widthMaximum door width - 1600mm Recommended door weightMaximum door weight - 250 kg Door opening angleMaximum opening angle - 120° Closing PowerEN Size 3-6 EnvironmentOperational temperature range: -15°c to + 50c Specification StatementThis Door Operator must have an electro-hydraulic motor with a capacity to push or pull doors up to 250kg in weight. The operator could be mounted on either side of the door for pull or push action and should be suitable for single or double doors fitted with butt hinges or pivots. The operator should have inputs for various electronic keypad controllers and motion sensors. _________________________________________________________ Dimensions110 (H) x 110 (D) x 716 (L) mm Pull Side Push Side Close Downloads Electromechanical Door Operators and Closers Catalogue Section.pdf (.pdf, 2.2 MB) Close Ordering Description Part Number Swing Door Operator (Pull Side) 8002SSIL Swing Door Operator (Push Side) 8002PSIL 8002 Accessories Description Part Number Telescopic Arm 110 – 235 Mm Reveal (Push Side) 8002-173005 Telescopic Arm 235 – 360 Mm Reveal (Push Side) 8002-173004 Joint for Telescopic Arm 235 – 485 Mm Reveal (Push Side) 8002-173191 Doorstop for Push Arm System 8002-100147 Spacer for Door Fitting 8002-173804BK Shaft Extensions Description Part Number Shaft Extension 20 mm 8002-173107 Shaft Extension 50 mm 8002-173108 Shaft Extension 70 mm 8002-173109 Co-Ordination Unit 8002-100091 Activation Units Description Part Number Radar Activation Unit 8002-1700007 Elbow Switch Including Stickers 8002-1700008 Presence Detection Units Description Part Number Eye-Tech K4 Infra-Red Presence Sensor 8002-738765 Limit Switch for Sensor or Indication 8002-655614 Close Lockwood 2636FS Free-Motion® Door Closer with Cam-Motion® TechnologyEN power selectable EN3 to EN6.