Trimec ES2000 Series Monitored Electric Strike Trimec ES2000 Series Monitored Electric Strike Trimec ES2000 Series Monitored Electric Strike The ES2000 series electric strikes are fully monitored high security products manufactured from stainless steel and designed for use with all access control systems. The strikes are suitable for use with hinged doors which require either fire or security control as part of a building management system. These strikes are flexible and can be changed from fail safe to fail secure, mounted on the left or right hand side of the door and are available in 12Vdc. They offer a strong, dependable and long-lasting electric strike solution with a 850kg holding force and endurance rating of 1 million cycles. Key Features Fully monitored - strike locked and door latched Fail safe/fail secure changeable on site High security 4 Hour fire rating 850kg holding force 1 million cycles endurance rating Cast stainless steel body Stainless steel locking pins SCEC Endorsed Low Current consumption - Max 175ma @12Vdc Solenoid rated for continuous use Mounting kit supplied as standard TRICARE® 5 Year Warranty Applications High traffic areas Fire rated door sets Open in/open out doors Suitable for use with all access control systems Standards and Compliance S3 (Security) Australian Lock Standard (AS4145.2.1993) D3 (Durability) Australian Lock Standard (AS4145.2.1993) BS 5872 Approved Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1.2005 (Part 1: Fire resistant door sets) Approved to UL1034 (highest level) CE Approved C-Tick Certified SCEC endorsed for secure areas Specification Voltage12Vdc Current175 mA @ 12Vdc SolenoidsSolenoids are rated for continuous use MonitoringSolenoid Monitor - 1 amp NO/NC microswitchDoor/Latch Monitor - 1 amp NO/NC microswitch Holding Force850kg Static Strength Rating EnduranceCycle tested to 1,000,000 operations LatchSuitable for 15mm latch bolt with 3mm door gap EnvironmentOperational temperature range - 20°C to +60°C BodySolid Stainless Steel Construction KeeperStainless Steel Specification StatementThe strike should be constructed of solid stainless steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. Monitoring must include independent door / latch& solenoid monitoring. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include CE, C-Tick and 4 hr fire rating. Dimensions Close Downloads ES200 and ES2000 Installation Instructions.pdf (.pdf, 342 kB) Trimec Electric Strikes Catalogue Section.pdf (.pdf, 2.1 MB) Close Ordering Description Part Number 12V Fail Safe Electric Strike 112001-000 12V Fail Secure Electric Strike 112002-000 12V ES2400 Fail Safe Electric Strike 112401-000 Accessories Description Part Number 13mm Rebate Plate 210100-541 Mounting Kit 220200-519 Note: If Extension Lips are required, use ES2100 Electric Strike (Refer to catalogue) Close Trimec ES2600 Panic Bar Electric Strike Trimec EL110 Series Electric Cupboard Lock Trimec ES200 Series Electric StrikeFail safe/fail secure changeable on site.