Lockwood 218/219 Series 10mm Radius Corner Push and Pull Plates Lockwood 218/219 Series 10mm Radius Corner Push and Pull Plates Lockwood 218/219 Series 10mm Radius Corner Push and Pull Plates The 218 Series Door Furniture is 250 x 50 x 2mm thick stainless steel or brass with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. ApplicationDesigned for use with 3570 Series Mortice Locks and on Push and Pull doors. Specification MaterialsStainless steel or brass. Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. EngravingOptions are available as indicated on the right. Finishes Standard Satin Stainless Steel SS Non Standard Polished Stainless Steel PS Powdercoat PC Polished Brass PB Dimensions250 x 50 x 2mm. Close Downloads Lockwood Push and Pull Door Furniture Catalogue.pdf (.pdf, 2.6 MB) Close Ordering 250mm x 50mm x 2mm with 10mm Radius Corners DescriptionPart Number Plain Plate (Visible Fix) L21907NN Plain Plate (Concealed Fix) L21807NN Plain Plate With D Handle (Concealed Fix) 152 x 17.5mm L21824NN/P2 Plain Plate With D Handle (Concealed Fix) 203 x 17.5mm L21824NN/P3 Plain Plate With D Handle (Visible Fix) 152 x 17.5mm L21924NN/P2 Plain Plate With D Handle (Visible Fix) 203 x 17.5mm L21924NN/P3 Close Lockwood 194 Series Round End Push and Pull Plates Lockwood Pull Handles Lockwood Stainless Steel Flush PullsInternal edges are finished for comfort of use.