A comprehensive range of automatic deadlatches for narrow stile
hinged doors, combining convenience and security.
Designed to enable emergency and utility services to enter specific
areas by second cylinder without giving access to all locksets in
the building and the ability to lockout keys with restricted access
at certain times.
Features and Benefits
- Ability to change lock function and handing without removing
the lock from the door
- Easy in-door commissioning
- One Universal cylinder cam performs all locking functions
- Australian designed and manufactured, the 3P80 Series Short
Backset Cylinder Mortice Locks are made from quality
- materials to meet high durability and strength
requirements.
- Requires 35 degrees of lever rotation to fully retract latch
and deadlatch
Standards
All 3P80 Series locks conform to the relevant Australian
Standards as detailed below
HIGH SECURITY
Conforms to level SL8 Australian Lock Standard
(AS4145.2-2008) when fitted with door furniture and anti drill
cylinder.
DURABILITY
Exceeds level D8 (Durability) Australian Lock Standard
(AS4145.2-2008)
ANTI-CORROSION
All 3P80 Series locks meet C6 (168hrs) Australian Lock
Standard (AS4145.2- 2008)
Furniture
Compatible with Lockwood 4800 and 5800 Series Furniture.
Face Plates
Stainless Steel 2.5mm face plates
Brass face plates provided for plated finishes
Case
Galvanised Steel for increased strength and corrosion
protection
Backset
- 23mm standard backset
- For extended backsets (25.4, 30, 38mm) refer to Synergy 3580
Series Mortice Lock Ordering Procedure
Latchbolts
- Latchbolts are 15mm, stainless steel
- Deadlatching is achieved by a stainless steel auxiliary bolt
Strike
- Stainless Steel 1.5mm D shape fabricator strike
Springs
High-grade spring steel material, corrosion protected
Cylinder Retaining Pin
Hard-drawn spring steel wire, corrosion protected. Uses
"slip pin" method
Door Thickness
Timber Doors
Timber door accessory packs are available upon request. Specify
3P80- TF01SS for mounting tabs and face plate accessory pack.
Door Clearance
To ensure correct functioning of the deadlatching
mechanism and security for all locks, the clearance between the
door and frame should be 3mm.
Cylinder
Bump Resistant five pin tumbler mechanism. Standard
Lockwood oval shaped, brass cylinders and brass barrels.
Unique universal cam drives all lock functions. Turn adaptors
may be required depending on function.
Extended Cylinders
Modular cylinder extensions are available for various door
thicknesses.
Keying
Standard Keying
- Supplied individually keyed with two keys per cylinder
- 78000 key combinations
Restricted Special Keying
Lockwood locks can be keyed to a number of controlled and/or
specially keyed systems. These range from legally protected keys to
protect against unauthorised duplication and can also include
specially designed key systems such as master key systems. This
allows for different levels of mechanical access control.
Standard Finishes
- Stainless Steel SS
- Chrome Plate CP
- Polished Brass PB
Product Codes
3P87
- Dual Entry Primary Lock
3P87V - Dual Entry Primary Lock with Anti-Vandal
Turn Adaptor
Note: Cylinders must be purchased separately.For lower cylinder
order 3P87/101SC.
Pentagon 3P87 Dual Entry lock can be made from Pentagon 3P82
Universal Primary lock (eg. 3P82SS) and 3P87 Dual Entry Accessory
Pack (SP3P87-119SS).
Pentagon Series Mortice Lock Catalogue Section
Pentagon Series Mortice Locks Catalogue Section
(.pdf, 3.6 MB)
Pentagon Series Service Manual
Pentagon Series Service Manual
(.pdf, 6.2 MB)
Pentagon Series Conversion Wall Chart
PentagonSeriesChart LORES - V2
(.pdf, 1 MB)
3P82 DXF File
3P82
(.dxf, 1.5 MB)